Kenzax model KHC-1631 cable press pliers, set of 12 pieces
Force high pressure cable pliers, model 6909250, size 10 inches
Knipex model 7102200 wire pliers, size 8 inches
$3.300.000
Knipex model 7102200 CoBolt series wire pliers are known. It has the most optimal method of making the hinge point, which creates a clean cut without crushing and does not require much force. It has very precise cutting edges for cutting soft and hard wires, nails, wire, screws up to 6 mm in diameter and even cutting piano wire, which is fully described in the other description section. Both hands can be used to increase the cutting force. The hardness of the cutting blade is about 64 on the Rockwell scale, which has been induced to work harder. The delicate and special design of the cutting blades makes it easy to cut large cross-sections. In the lower part of the hinge connection point, there is a place for holding and pulling thin wires up to 1 mm. The contact surface of the hand on the handle is large, and this causes a better spread of force and ease of work. However, compared to wire cutters of the same length, 60% less force is used for cutting. The body made of chrome vanadium steel is special for hard work by forging method and it is hardened with oil in several stages for greater impact resistance. On the body, the final finishing steps are done in black color and the total length of the tool is 200 mm. The handles are prepared with single-component coating for easier handling, and at the same time, due to the raw materials used, it has anti-sweat and anti-slip properties.
Introduction
Knipex model 7102200 CoBolt series wire pliers are known. It has the most optimal method of making the hinge point, which creates a clean cut without crushing and does not require much force. It has very precise cutting edges for cutting soft and hard wires, nails, wire, screws up to 6 mm in diameter and even cutting piano wire, which is fully described in the other description section. Both hands can be used to increase the cutting force. The hardness of the cutting blade is about 64 on the Rockwell scale, which has been induced to work harder. The delicate and special design of the cutting blades makes it easy to cut large cross-sections. In the lower part of the hinge connection point, there is a place for holding and pulling thin wires up to 1 mm. The contact surface of the hand on the handle is large, and this causes a better spread of force and ease of work. However, compared to wire cutters of the same length, 60% less force is used for cutting. The body made of chrome vanadium steel is special for hard work by forging method and it is hardened with oil in several stages for greater impact resistance. On the body, the final finishing steps are done in black color and the total length of the tool is 200 mm. The handles are prepared with a single-component coating for easier handling, and at the same time, due to the raw materials used, it has anti-sweat and anti-slip properties.
Dimensions | 200x62x21 mm |
---|---|
body material | Chrome-vanadium |
handle type | coated |
Maximum opening rate | 7 mm |
Type of Pliers | folded wire |
Pliers features | cover |
Other explanations | at_–darai-ghablit-brsh-o- |
brand | knipex |
color | red |
Reviews
There are no reviews yet.