Iran Patek LM 2211 number mandrel set 3 mm

Since the beginning of 2013, Iran Patek factories have started their activities in the field of hand tools, which include several units of design, mold making, tool making, forging (hot forging), machining, welding, pressing, electroplating, and blacksmithing. , heat treatment. One of the marking tools is mandrels, and usually mandrels are named according to their use, and they come in different types such as letter mandrels, number mandrels, and mandrels. space maker, marking mandrel, remover mandrel, etc. are produced, of course, the mandrels are not only for marking and have other capabilities such as aligning two holes, setting rivets in their place, removing rivets. And they also have screws. Iran Patek’s LM 2211 mandrel set is of the hammer type and is placed in plastic boxes. This set of mandrels contains 9 mandrels, the cross section of each mandrel is 7 mm, the height of each mandrel is 70 mm, and the height of the number inserted on each mandrel is It can be 3 mm. Due to being English, the numbers of the 6 and 9 are the same; As it can be seen from their appearance, these two numbers are inverse of each other, therefore, one mandrel is intended to insert both numbers. This tool is used to mark materials with an approximate strength of 1200N/mm² It is suitable and the material of this mandrel is made of steel and is produced from cold drawn sections and has a hardness of 58 to 60 Rockwell C and has a nickel coating.

SKU: dkp-90377 Category: Mandrel

Introduction

Iran Patek factories started their activity in the field of hand tools since the beginning of 2013, which includes many units of design, mold making, tool making, forging (hot forging), machining, Welding, pressing, plating, blackening, heat treatment. One of the marking tools is mandrels, and usually mandrels are named according to their use, and they come in different types such as letter mandrels, number mandrels, and mandrels. space maker, marking mandrel, remover mandrel, etc. are produced, of course, the mandrels are not only for marking and have other capabilities such as aligning two holes, setting rivets in their place, removing rivets. And they also have screws. Iran Patek’s LM 2211 mandrel set is of the hammer type and is placed in plastic boxes. This set of mandrels contains 9 mandrels, the cross section of each mandrel is 7 mm, the height of each mandrel is 70 mm, and the height of the number inserted on each mandrel is It can be 3 mm. Due to being English, the numbers of the 6 and 9 are the same; As it can be seen from their appearance, these two numbers are inverse of each other, therefore, one mandrel is intended to insert both numbers. This tool is used to mark materials with an approximate strength of 1200N/mm² It is suitable and the material of this mandrel is made of steel and is produced from cold drawn sections and has a hardness of 58 to 60 Rockwell C and has a nickel coating.